Berger 6 mm 108 Elite Hunter Bullet Part# 24556 100/Box
Product Description
Berger’s 6mm 108 Grain Elite Hunter was designed for shooters that want to utilize extremely flat shooting 6mm cartridges, like the 6mm Creedmoor or 6 PRC, to take animals at longer ranges than traditional hunting Rifle Bullets. The heavier weight and optimized hybrid ogive design allow for the Rifle Bullet to retain energy for effective hydrostatic shock in animals from close ranges to easily out past 500 yards. Ideal for hunting small to medium sized game such as White Tail Deer.
Berger Elite Hunter Rifle Bullets utilize their industry-leading hybrid ogive, which blends tangent and secant designs to optimize efficiency, reduce wind-drift, and minimize sensitivity to seating depth. Elite Hunter Rifle Bullets are identical in construction, shape and performance to the Berger Hybrid Target series, except they utilize a thinner J4 Precision Jacket for rapid expansion on game animals. Elite Hunters are designed to penetrate 2-3″ and then begin to expand and create a massive wound cavity up to 15″. The hydrostatic shock causes most animals to drop immediately.
Elite Hunter Hybrid Features
Hybrid Ogive
Hybrid Ogives blend the best aspects of tangent and secant nose shapes into one ogive. Near the bearing surface, the shape starts off as a tangent, which makes it easy to tune, then transitions to a secant ogive, which results in a flatter trajectory and less wind drift.
Consistent Core
Our exacting core manufacturing process is one of the reasons when you buy a box of Berger, you don’t have to worry about sorting by weight. This gives you more reliable drop, consistent BC, and better accuracy.
Boat Tail
Boat Tail bullets provide an aerodynamic advantage at longer ranges over their flat base counterparts, especially while transitioning from transonic to subsonic velocities.
J4 Hunting Jacket
J4 Precision Bullet Jackets are the #1 choice of custom bullet manufacturers. They are the most consistent and concentric copper jackets in the world holding an unprecedented +/- .0003” tolerance. J4 hunting jackets are produced slightly thinner to allow for 2-3″” of penetration before rapidly expanding, producing extreme hydrostatic shock and a massive wound cavity
Part# 24556
Caliber |
6 mm |
---|---|
Bullet Weight |
108 Grain |
Product Line |
Elite Hunter |
G1 BC |
0.559 |
G7 BC |
0.287 |
G7 Form Factor |
0.912 |
Minimum Twist (or faster) |
1:8" |
Ogive Style |
Hybrid |
Base Style |
Boat Tail |
Jacket |
J4 Hunting Jacket |
Sectional Density |
0.261 |
Bullet Dia. |
0.243 |
OAL |
1.26 |
Base to Ogive |
0.649 |
Nose Length |
0.651 |
Bearing Surface |
0.408 |
Boat Tail Length |
0.185 |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.